Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 891-W PoE without found the adapter!

Hello, every docs and manual say "connect Cisco Power Adapter 48VDC PoE Input Jack" but searching in the networks nobody sells this adapter, anyone know where ???

Screenshot from 2013-11-24 17:34:46.png

Everyone's tags (1)
4 REPLIES
Hall of Fame Super Gold

Cisco 891-W PoE without found the adapter!

I believe the power brick is part of the "package" when you purchase the 800-IL-PM-4 (PoE Daughter Card).

New Member

Cisco 891-W PoE without found the adapter!

I believe the same when purchase my first IP Phone!!! and what you think happened?

Hall of Fame Super Gold

Cisco 891-W PoE without found the adapter!

Contact Cisco TAC and see if they can point to you the correct part number for the power brick.  Then you can ask them for authorized Cisco reseller in your area. 

New Member

Hi,Leo is right and it should

Hi,

Leo is right and it should come as part of the kit when you order "800-IL-PM-4"

Full Kit should include:
Internal PoE module
48v PoE power cube
Power cord for the power cube
(2) standoffs with two notches
(1) standoff with one notch
(3) screws

http://www.cisco.com/c/en/us/td/docs/routers/access/800/860-880-890/hardware/installation/memory/880FRU.html#wp45561

 

If for some reason you did not get it or it fails and you need a new one you can use part number "ADP-80LB".  I dont think Cisco will sell you this as a standalone item so you may have to look on Ebay, PChub or google to find a place that sells it. 

 

Good luck!

695
Views
0
Helpful
4
Replies
CreatePlease to create content