cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1248
Views
0
Helpful
4
Replies

Cisco Access Point Aironet 1040 configuration: Not getting 802.11n to work, only 802.11ag.

BalzGuenatJAG
Level 1
Level 1

I can't figure out how to get the config right for the 802.11n channel to work. Any help will be appreciated.

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

For 802.11n to work, you need to have 802.11a radio.

Encryption/Security is WPA2/AES PSK or OPEN encryption.

What have you configured?

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

For 802.11n to work, you need to have 802.11a radio.

Encryption/Security is WPA2/AES PSK or OPEN encryption.

What have you configured?

It might be the encryption. It's set to TKIP right now.

I'll change it and report back with the results.

Changed it, works now. Thanks a lot!    

Glad to be of some form of assistance. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: