I have recently inherited a few networking responsibilities in an SMB network. Nothing overly complicated. Here's my issue, there is an ASA 5505 used for VPN and in the near future a DMZ. I can connect via the console but I'd rather use ASDM. The problem is that I can't get it to connect. VLAN 1 (Inside) has an address of 192.168.200.254. This is in ethernet 0/0. I have a laptop plugged into ethernet 0/4 and the laptop has an address on the same x.x.200 VLAN. I can ping the VLAN1 address, but I can't use http://192.168.200.254/admin to get to ASDM.
Any thoughts on how I can do this? What I should check? Can the internal webserver that hosts the ASDM be turned off?
Thanks for any help. If you need any more information just let me know. This is my first real network wrangle so bear with me on this.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...