03-18-2014 12:40 AM - edited 03-07-2019 06:44 PM
hi mates,
i have one cisco catalyst 4506e with sup-7L and LAN base Ios.
i need ospf command but i don't know i need ip base ios or enterprise ios.
the cisco must replace one alpine switch with this ospf command
configure ospf add vlan "cs-fdi" area 0.0.0.0 link-type broadcast
configure ospf add vlan "dati" area 0.0.0.0 link-type broadcast
configure ospf add vlan "fonia" area 0.0.0.0 link-type broadcast
just ip base ios is ok for this command??
thx a lot
Luca
Solved! Go to Solution.
03-20-2014 10:24 AM
Yes IP Base license will work for that. Obviously the commands will be different.
To verify what features you need work with which licenses, check this link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_23474.html
03-20-2014 10:24 AM
Yes IP Base license will work for that. Obviously the commands will be different.
To verify what features you need work with which licenses, check this link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_23474.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide