Hi all,
I got some problem today, I tried to upgrade IOS from SXI2a to SXI9 in cat 6506 VSS. But the problem is that switch always boot with old IOS. I put the new IOS in sup-bootdisk and slave sup-bootdisk, bootvar is ok with new IOS:
show redundancy
Redundant System Information :
------------------------------
Available system uptime = 3 hours, 32 minutes
Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none
Hardware Mode = Duplex
Configured Redundancy Mode = sso
Operating Redundancy Mode = sso
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
-------------------------------
Active Location = slot 1/5
Current Software state = ACTIVE
Uptime in current state = 3 hours, 31 minutes
Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
BOOT = sup-bootdisK:s72033-ipbase-mz.122-33.SXI9.bin,1;
Configuration register = 0x2102
Peer Processor Information :
----------------------------
Standby Location = slot 2/5
Current Software state = STANDBY HOT
Uptime in current state = 3 hours, 27 minutes
Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASE-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
BOOT = sup-bootdisK:s72033-ipbase-mz.122-33.SXI9.bin,1;
Configuration register = 0x2102
Show bootvar is ok but switch always boot with old IOS SXI2a, any idea???, some bug in IOS sxi2a???, I will try to delete de old IOS from sup bootdisk and try with the new one only.
Regards.
