02-09-2010 08:48 AM - edited 03-06-2019 09:38 AM
Hello All,
I have cisco WS-C6509-E with IOS s72033-advipservicesk9_wan-mz.122-33.SXI1.bin. I see that all the physical L3 interface, L2 interfaces, vlan interfaces have same mac address. I was expecting different mac address on all l3 physical interfaces.
Anybody knows the reason for this? Or is there any white paper which explain this?
Example:
Router#sh int g2/3
GigabitEthernet2/3 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0025.b4cd.7040 (bia 0025.b4cd.7040)
.
.
Output Omited
.
.
Router#sh int g2/2
GigabitEthernet2/2 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0025.b4cd.7040 (bia 0025.b4cd.7040)
.
.
Output Omited
Regards
Vinay
.
.
02-09-2010 09:13 AM
Hello Vinay,
Have a look at this document for detailed explanation:
HTH
Reza
02-09-2010 10:07 AM
Thanks Reza !!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: