Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco catalyst 2960CG-8TC-L

I have a switch  cisco catalyst 2960CG-8TC-L (mini switch), and I can't connect it
with telnet because there is no login local on it, and I can't write on this switch this
command. Does someone know the command of this switch for enable login local?

Everyone's tags (1)
1 REPLY
VIP Purple

Login local should not effect

Login local should not effect telnet its for reverting to the username/password config when you come in by vty ports, You can configure telnet access from the gui you should be able to access it then once the password is set , not all commands/features would be aviolable as in the 24/48 port models

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/hardware/quick/guide/ol14970.html

You can check what your software support in feature navigator

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

76
Views
0
Helpful
1
Replies
CreatePlease to create content