cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
667
Views
0
Helpful
2
Replies

Cisco Catalyst 2960S F48LPSL

Help Please..

Error loading "flash:c2960s-universalk9-mz.152-1.E1/c2960s-universalk9-mz.152-1.E1.bin"

Interrupt within 5 seconds to abort boot process.

Loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"...

Error loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically.  The BOOT

environment variable needs to be set to a bootable

image.

2 Replies 2

acampbell
VIP Alumni
VIP Alumni

Hi,

Looks like your ios image is corrupt

Try following this instruction from the release notes/ config guide

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/15-2_1_e/configuration/guide/2960_scg/swtrbl.html#wp1452100

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Leo Laohoo
Hall of Fame
Hall of Fame

While in ROMmon, post the output to the command "dir flash:".

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco