Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco Catalyst 2960S F48LPSL

Help Please..

Error loading "flash:c2960s-universalk9-mz.152-1.E1/c2960s-universalk9-mz.152-1.E1.bin"

Interrupt within 5 seconds to abort boot process.

Loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"...

Error loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically.  The BOOT

environment variable needs to be set to a bootable

image.

  • LAN Switching and Routing
Everyone's tags (1)
2 REPLIES
Green

Cisco Catalyst 2960S F48LPSL

Hi,

Looks like your ios image is corrupt

Try following this instruction from the release notes/ config guide

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/15-2_1_e/configuration/guide/2960_scg/swtrbl.html#wp1452100

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Hall of Fame Super Gold

Cisco Catalyst 2960S F48LPSL

While in ROMmon, post the output to the command "dir flash:".

209
Views
0
Helpful
2
Replies