Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco catalyst 3560 configure

I have cisco 3560 series switch i want to configure using rj45 rollover cable, my pc has no com port, how can i configure using LAN and is it possible to configure using cisco packet tracer

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Hello faizkt777,Using Serial

Hello faizkt777,

Using Serial to USB adapter you can resolve your problem. If you install the right driver, it would generate COM Port so you can configure your switch with it. Another option is to use  cisco usb console port, if it is provide with your switch. you can download the cisco driver here,

https://software.cisco.com/download/release.html?mdfid=282979369&softwareid=282855122&release=3.1

 

Try and let us know if this suggestion can solve your problem. 
Rate and marked as correct if it is the case. 

 

Regards,

1 REPLY
New Member

Hello faizkt777,Using Serial

Hello faizkt777,

Using Serial to USB adapter you can resolve your problem. If you install the right driver, it would generate COM Port so you can configure your switch with it. Another option is to use  cisco usb console port, if it is provide with your switch. you can download the cisco driver here,

https://software.cisco.com/download/release.html?mdfid=282979369&softwareid=282855122&release=3.1

 

Try and let us know if this suggestion can solve your problem. 
Rate and marked as correct if it is the case. 

 

Regards,

67
Views
0
Helpful
1
Replies