Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco catalyst 4506-e boot error

 

 

Rommon signature verification PASSED for golden image
Rommon signature verification PASSED for primary image
FPGA signature verification PASSED for primary image

 

 


 ************************************************************
 *                                                          *
 * Welcome to Rom Monitor for   WS-X45-SUP7-E System.       *
 * Copyright (c) 2008-2011 by Cisco Systems, Inc.           *
 * All rights reserved.                                     *
 *                                                          *
 ************************************************************

 Primary Rom Monitor Version 15.0(1r)SG5
 CPU Rev: 2.2, Board Rev: 10, Board Type: 101, CPLD Moka Rev: 7.0x3718.0xb565
 Chassis: WS-C4506-E
Got Mac Address: c0:67:af:40:24:c2

 MAC Address  : c0-67-af-40-24-c2
 IP Address   : 14.18.2.234
 Netmask      : 255.255.255.0
 Gateway      : 14.18.2.21
 TftpServer   : Not set.

 Peer supervisor not detected or is not running IOS
 Supervisor uplinks and all linecards have been reset


 ***** The system will autoboot in 5 seconds *****


 Type control-C to prevent autobooting.
 . . . . .

 ******** The system will autoboot now ********


 config-register = 0x2101

 Autobooting using the first file from bootflash.....

 *
 *
loading image

Checking digital signature
bootflash:/cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin: Digitally Signed Release Software with key version A

Rommon reg: 0x00004F80
Reset2Reg: 0x00000F00

Image load status: 0x00000000
####
Snowtrooper 155 controller 0x044DDBD2..0x04688FA7 Size:0x0041DCD4 Program Done!
###########################
[   57.324367] pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
Starting System Services
Calculating module dependencies ...
Loading rtc-ds1307
RTNETLINK answers: Invalid argument
No Mountpoints DefinedNov 13 09:35:24 %IOSXE-3-PLATFORM: process sshd[4211]: error: Bind to port 22 on :: failed: Address already in use.

diagsk10-post version 5.1.4.0

prod: WS-X45-SUP7-E part: 73-14393-02 serial: CAT1837L75P


Power-on-self-test for Module 1: WS-X45-SUP7-E

CPU Subsystem Tests ...
 seeprom: Pass

Traffic: L3 Loopback ...
 Test Results: Pass


Traffic: L2 Loopback ...

post timeout
A Critical job [post] exited abnormally! Reloading the supervisor
Killed by signal [TERM]
Loading virtuclock as vuclock
Loading gsbu64atomic as gdb64atomic
Loading isp1362_hcd_k10
/dev/fd/13: line 273: /sys/devices/system/edac/mc/edac_mc_log_ce: No such file or directory
Starting IOS Services
AIPC Module Loaded...
cat4k-watchdog[6250]: Watchdog daemon initialized on 2 CPU(s)

cat4k-watchdog[6250]: Watchdog daemon started.
Dumping all the logs to /root/reload.20141113..Please be patient
All logs dumped
sysmgr: <<%SYSMGR-2-SERVICE_CRASHED>> Service "System Manager (parser)" (PID 6820) hasn't caught signal 15 (no core).

/bin/kill: 8178: No such process
/bin/kill: 8179: No such process
/bin/kill: 8197: No such process
/bin/kill: 8198: No such process
/etc/rc6.d/S01reboot: line 198: umount_cisco_filesystems: command not found
Please stand by while rebooting the system...
[  266.041680] Restarting system.
Rommon signature verification PASSED for golden image
Rommon signature verification PASSED for primary image
FPGA signature verification PASSED for primary image

 

 


 ************************************************************
 *                                                          *
 * Welcome to Rom Monitor for   WS-X45-SUP7-E System.       *
 * Copyright (c) 2008-2011 by Cisco Systems, Inc.           *
 * All rights reserved.                                     *
 *                                                          *
 ************************************************************

 Primary Rom Monitor Version 15.0(1r)SG5
 CPU Rev: 2.2, Board Rev: 10, Board Type: 101, CPLD Moka Rev: 7.0x3718.0xb565
 Chassis: WS-C4506-E
Got Mac Address: c0:67:af:40:24:c2

 MAC Address  : c0-67-af-40-24-c2
 IP Address   : 14.18.2.234
 Netmask      : 255.255.255.0
 Gateway      : 14.18.2.21
 TftpServer   : Not set.

 Peer supervisor not detected or is not running IOS
 Supervisor uplinks and all linecards have been reset


 ***** The system will autoboot in 5 seconds *****


 Type control-C to prevent autobooting.
 . .

 ******** The system will autoboot now ********


 config-register = 0x2101

 Autobooting using the first file from bootflash.....

loading image

 

Version: cat4500e-universal.SPA.03.05.02.E.152-1.E2.bin

 

 

Any help PLZ

 

 

  • LAN Switching and Routing
1 REPLY
Hall of Fame Super Gold

config-register = 0x2101

config-register = 0x2101
Autobooting using the first file from bootflash.....

You need to provide more information.  What are you trying to do?  How many IOS file(s) do you have in the bootflash? 

sysmgr: <<%SYSMGR-2-SERVICE_CRASHED>> Service "System Manager (parser)" (PID 6820) hasn't caught signal 15 (no core).

Break into the auto-boot process and post the output to the command "dir bootflash:".

 

 

622
Views
0
Helpful
1
Replies
This widget could not be displayed.