CISCO-CONFIG-COPY-MIB.

[smothuku]

Dear Experts ,

I've found one document in which SNMP is used to to copy a configuration file to and from a Cisco device with the CISCO-CONFIG-COPY-MIB.

It is not supported on Catalyst switches.

Anybody has any idea how to the same on Catalyst switches.(i.e 3750 switch).

Enclosed is the url for your reference.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml

Thanks,

satish

[David Stanford]

This MIB is supported on the 3750, so it should work. It doesn't not work on Catalysts running CatOS.

[Jakub Oškera]

Hi, in our enviroment we have Cisco Small Business switches (Sx200,Sx300,Sx500). I wanted to try copy configuration via SNMP but I got a message that "No such object available at this OID". I tried to use snmpwalk and I got some information just at OID 1.3.6.1.4.1.9.9. This OID describes information about CDP protocol and when I want information for example at OID 1.3.6.1.4.1.9.9.96 and far, I get the error message.

It is possible that cisco small business not support this OID?

The firmware on switch is 1.4.9.4 (latest) and device is SF300-24.

Thank you

[ngeorgaki]

have you seen this page?

http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-CONFIG-COPY-MIB