Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco EnergyWise-How to configure

As i was reading the Ask the Expert topic about EnergyWise in cisco switches,one question comes in my mind about how to configure it on a Cisco 3550 switch which can turn off or switch off the Cisco VoIP phones and Cisco APs at a fixed time.

4 REPLIES
Hall of Fame Super Gold

Re: Cisco EnergyWise-How to configure

Firstly, you need to to use IOS version 12.2(50)SE.

Unfortunately, there are no Configuration Examples yet for EnergyWise but you might as well look at the commands:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/command/reference/cli1.html#wp10904924

Hope this helps.

Re: Cisco EnergyWise-How to configure

Thank you

Hall of Fame Super Gold

Re: Cisco EnergyWise-How to configure

Thanks for the rating.

Bronze

Re: Cisco EnergyWise-How to configure

I've noticed some configuration examples in Chapter 4 of the Catalyst 2960 12.2(50)SE Software Configuration Guide, available to download from http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_50_se/configuration/guide/scg.html

1156
Views
4
Helpful
4
Replies