Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco Express 500

10 express 500 and 2 2960 are uplinked to a 3750 .

PC's getting dhcp address from all 2960's and 3750 itself .

but not with express 500 .

3 REPLIES
Hall of Fame Super Gold

Re: Cisco Express 500

Can you provide more information about your network? How about the configs for the Express 500?

Gold

Re: Cisco Express 500

This is just a wild shot in the dark.

have you configured the 500 switches uplink port as uplinks ? ie the port you connect between the 500 and the 3750.

good luck

Re: Cisco Express 500

Have you checked the status and configuration of the interfaces. This is most likely a trunking issue.

You should ensure you CE500 ports connected to the 3750 are set to trunk ports.

You will also want to ensure that you have ip helper-address assigned to these vlans so that these ports can get a dhcp address.

HTH, Please rate if so

Regards,

Justin

190
Views
0
Helpful
3
Replies
CreatePlease to create content