I know this is probably in the top 5 of "frequently asked questions" but I'm having trouble getting some decent advice on the net, so I thought I'd try this forum 8-)
I'm currently studying for my CCNA, and also looking for a home network upgrade, so I thought about grabbing some Cisco gear from eBay to play around with.
Currently I have my eye on an auction that includes a Cisco 2611 with 2x WIC 1B S/T cards installed, Cisco Catalyst WS-C2924-XL and a Cisco Catalyst WS-C2924C-XL. If I can grab these for under $150-200 (AU, which is like $80-130 US?), would it be worth it?
Will it also be scalable enough to use to study for the CCNP? And will it give me decent home performance plus protection. (VPN ?)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...