Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Cisco inline method and power injector.

Hi everybody.

IEEE 802.3af power may be delivered using   over power Ethernet capable Ethernet port, which is referred to as an End-Point PSE or by a mid-span PSE that can be used to deliver Power over Ethernet in the event an existing non-Power over Ethernet capable Ethernet switch is used.

How about cisco inline method?  Can we use power injector? for example:

sw-------power injector--------PoE

The above switch does not implement Cisco inline method, while PoE is prestandard cisco-inline -method compatible device, Can we use power injector as shown above?

thanks and have a great weekend.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco inline method and power injector.

Yes.  It is possible because I've done this before.

Even if the switch is PoE and you have an injector in between, the injector will take precedence and power the device.

2 REPLIES
Hall of Fame Super Gold

Re: Cisco inline method and power injector.

Yes.  It is possible because I've done this before.

Even if the switch is PoE and you have an injector in between, the injector will take precedence and power the device.

Bronze

Cisco inline method and power injector.

Does power injector have 802.3 af intelligence/ cisco inline protocol?  I will hazard a guess it does not.

thanks.

426
Views
0
Helpful
2
Replies