I am facing an issue and want your help, i am using cisco 6509 switch with IOS 12.2(33)SXI8a. The cpu usage remains sound on 6%. The moment i configure it for AAA the cpu start shooting to 50%. I have verified the graphs of each switch port and no traffic is seen on it. when i issue show process cpu command the process ios-base is taking almost all the cpu. Can anyone help me out on it.i am attaching the AAA commands which i issue.
Your command set there is pretty straightforward. I don't see a specific bug associated with that release but the TAC would probably advise an upgrade. Your release is from December 2011 and 12.2(33)SXI12 is current (reference).
Thanks Marvin. What I observed is that even when I issue show running config the cpu shoots to 50 plus. Only when the command is issued via ssh connection. If I access the switch from console the cpu stays normal around 10 percent. Anyone having the same issue please help.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...