I have network core swith 3750 and 3 CE500 (user switch). And i have DHCP server on Win2003(vlan 11, ip: 10.10.11.11 connect to 3750). How i can user DHCP for client connected to ce500 with vlan 12(10.10.12.0/24) and vlan 13(10.10.13.0/24). In 3750 i can use 'ip helper-address', how i can make it on ce500?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...