Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ISR 1861: snmpwalk failed on sysObjectID

Hi folks!

I'm doing a snmpwalk query on a Cisco 1861 ISR.

I'quering the following MIB variables

C:\>snmpwalk -v2c -c public 88.63.17.142 sysdescr

SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, C1861 Software (C1861-ADVIP

SERVICESK9-M), Version 12.4(11)XW5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Sat 17-Nov-07 05:31 by prod_rel_team

C:\>snmpwalk -v2c -c public 88.63.17.142 sysObjectID

Timeout: No Response from 88.63.17.142

but the sysObjectID goes in timeout.

What kind of problem I'm hitting?

Any ehlps would be appreciate.

thanks a lot

Leonardo

1 REPLY
Silver

Re: Cisco ISR 1861: snmpwalk failed on sysObjectID

Performing the snmpwalk on the ipRouteTable MIB may cause high CPU and reloads

For further information click this link.

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/release/notes/rn2430xw.html

294
Views
0
Helpful
1
Replies