Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Me-3400 issues every 6 hours

Hi

Any clues as to what I can start looking at for this ? Please notice the recurrance to the second every 6 hours.

Hardware two Cisco ME-3400's running me340x-metroipaccessk9-mz.122-55.SE.bin

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Standby -> Active

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Standby -> Active

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Standby -> Active

Nov 11 23:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 11 23:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.254 on Vlan920 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Active -> Speak

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Active -> Speak

Nov 11 23:41:25 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Active -> Speak

Nov 11 23:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from LOADING to FULL, Loading Done

Nov 11 23:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.254 on Vlan920 from LOADING to FULL, Loading Done

Nov 11 23:41:26 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Speak -> Standby

Nov 11 23:41:26 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Speak -> Standby

Nov 11 23:41:26 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Speak -> Standby

Nov 13 05:41:24 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Standby -> Active

Nov 13 05:41:24 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Standby -> Active

Nov 13 05:41:25 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Active -> Speak

Nov 13 05:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 13 05:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 13 05:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Standby -> Active

Nov 13 05:41:25 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Active -> Speak

Nov 13 05:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Active -> Speak

Nov 13 05:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from LOADING to FULL, Loading Done

Nov 13 05:41:25 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from LOADING to FULL, Loading Done

Nov 13 05:41:26 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Speak -> Standby

Nov 13 05:41:26 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Speak -> Standby

Nov 13 05:41:26 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Speak -> Standby

Nov 14 11:41:24 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Standby -> Active

Nov 14 11:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 14 11:41:24 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Standby -> Active

Nov 14 11:41:24 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Active -> Speak

Nov 14 11:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 14 11:41:24 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Active -> Speak

Nov 14 11:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from LOADING to FULL, Loading Done

Nov 14 11:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from LOADING to FULL, Loading Done

Nov 14 11:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Speak -> Standby

Nov 14 11:41:25 WST: %HSRP-5-STATECHANGE: Vlan782 Grp 1 state Speak -> Standby

Thanks in Advance,

Mark

Message was edited by: Mark Tegg Removed duplicate paste

3 REPLIES
New Member

Re: Cisco Me-3400 issues every 6 hours

Updated - Now that I pay more attention to the dates and less to the times. It's every 30 hours.

Latest log additions.

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.254 on Vlan920 from FULL to DOWN, Neighbor Down: Dead timer expired

Nov 15 17:41:24 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Active -> Speak

Nov 15 17:41:24 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Active -> Speak

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan922 from LOADING to FULL, Loading Done

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.248 on Vlan782 from LOADING to FULL, Loading Done

Nov 15 17:41:24 WST: %OSPF-5-ADJCHG: Process 120, Nbr 10.120.0.254 on Vlan920 from LOADING to FULL, Loading Done

Nov 15 17:41:25 WST: %HSRP-5-STATECHANGE: Vlan784 Grp 1 state Speak -> Standby

Nov 15 17:41:25 WST: %HSRP-5-STATECHANGE: Vlan780 Grp 1 state Speak -> Standby

Thanks,

Mark

Cisco Employee

Cisco Me-3400 issues every 6 hours

any high cpu situation?

also check STP, any abnormal? show spanning-tree vlan xxx detail

New Member

Re: Cisco Me-3400 issues every 6 hours

Hi Dazhi

CPU utilization for five seconds: 8%/0%; one minute: 8%; five minutes:

History shows upto 70% on occasion, but not specifically around the time of the last flap.

Not running spanning tree. combination of REP and trunks, but topology not yet complete , so no potential for loops as it stands today.

Please see attached diagram.

Thanks,

Mark

484
Views
0
Helpful
3
Replies
CreatePlease login to create content