Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ME3400 unable to change duplex setting

Hi,

I am using ME3400 Switch for setting WDCMA for L2 switch config.

Packet Loss is trigger on RBS and collission detected. RBS setting for duplex is Full duplex and ME3400 switch duplex default : auto

I have try to change duplex setting on interface but error : Invalid input detected.

Below is my ME3400 version :

%Error parsing filename (Unknown error 0)

ME3400_BUNO01#show ver

Cisco IOS Software, ME340x Software (ME340x-METROACCESS-M), Version 12.2(50)SE4, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Fri 26-Mar-10 09:46 by prod_rel_team

Image text-base: 0x01000000, data-base: 0x02300000

ROM: Bootstrap program is ME340x boot loader

BOOTLDR: ME340x Boot Loader (ME340x-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)

ME3400_BUNO01 uptime is 2 days, 22 hours, 46 minutes

System returned to ROM by power-on

System restarted at 15:45:48 UTC Sun Sep 15 2013

System image file is "flash:/me340x-metroaccess-mz.122-50.SE4.bin"

cisco ME-3400G-12CS-D (PowerPC405) processor (revision D0) with 131072K bytes of memory.

Processor board ID FOC1346X4NJ

Last reset from power-on

6 Virtual Ethernet interfaces

16 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : 64:16:8D:01:8C:00

Motherboard assembly number     : 73-10630-08

Power supply part number        : 341-0204-01

Motherboard serial number       : FOC134644LQ

Power supply serial number      : DTH13228098

Model revision number           : D0

Motherboard revision number     : A0

Model number                    : ME-3400G-12CS-D

Daughterboard assembly number   : 73-10631-06

Daughterboard serial number     : FOC13462XKL

System serial number            : FOC1346X4NJ

Top Assembly Part Number        : 800-27862-02

Top Assembly Revision Number    : A0

Version ID                      : V02

CLEI Code Number                : COMXF00ARA

Daughterboard revision number   : A0

Second power supply part number : 341-0204-01

Second power supply serial number : DTH13228097

Hardware Board Revision Number  : 0x03

Switch Ports Model              SW Version            SW Image                

------ ----- -----              ----------            ----------              

*    1 16    ME-3400G-12CS-D    12.2(50)SE4           ME340x-METROACCESS-M    

Configuration register is 0xF

ME3400_BUNO01#show int status

Port      Name               Status       Vlan       Duplex  Speed Type

Gi0/1                        connected    trunk      a-half  a-100 10/100/1000BaseTX

Gi0/2                        connected    trunk      a-half  a-100 10/100/1000BaseTX

Gi0/3                        disabled     trunk        auto   auto Not Present

Gi0/4                        disabled     1            auto   auto Not Present

Gi0/5                        disabled     trunk        auto   auto Not Present

Gi0/6                        disabled     1            auto   auto Not Present

Gi0/7                        disabled     1            auto   auto Not Present

Gi0/8                        disabled     1            auto   auto Not Present

Gi0/9                        disabled     1            auto   auto Not Present

Gi0/10                       disabled     1            auto   auto Not Present

Gi0/11                       disabled     1            auto   auto Not Present

Gi0/12                       disabled     1            auto   auto Not Present

Gi0/13                       notconnect   1            full   1000 1000BaseSX SFP

Gi0/14                       notconnect   1            auto   auto Not Present

Gi0/15                       notconnect   1            auto   auto Not Present

Gi0/16                       notconnect   1            auto   auto Not Present

ME3400_BUNO01(config)#interface gi0/1

ME3400_BUNO01(config-if)#duplex        

                          ^

% Invalid input detected at '^' marker.

ME3400_BUNO01(config-if)#duplex full

                          ^

% Invalid input detected at '^' marke

Can some help me on this?

do i have to upgrade these switch?

What are the compatible version ?

Everyone's tags (1)
1 REPLY

Cisco ME3400 unable to change duplex setting

901
Views
0
Helpful
1
Replies