Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Nexus 5010

I saw a Cisco Nexus 5010 and it has 5 RJ-45 port, 1 for Console, 2 for MGMT and another two port for what ??? L1 and L2, somebody can explain me that ?? Thank yuo so much !!!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco Nexus 5010

Konus,

The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).

The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.

JayaKrishna

4 REPLIES
Cisco Employee

Re: Cisco Nexus 5010

Hi ,

Only one port works our of those 4 ports. L1/L2/MGMT1 are not usable yet and will be used in future. A document defect is opened to document this. Defect id: CSCth37349

Hope that answers your question.

JayaKrishna

New Member

Re: Cisco Nexus 5010

Thank you so much for your quick feedback JayaKrishna, but right now I'm more confused than before:

Waht is a Defect ID: CSCth37349 ?

All usable ports on that switch (Nexus) are SFP, is there any adapter that permits to connect NIC server or NIC pc to the Nexus through RJ-45 and UTP cable?

Thank you so much

Cisco Employee

Re: Cisco Nexus 5010

Konus,

The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).

The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.

JayaKrishna

New Member

Re: Cisco Nexus 5010

Thank you So Much Jaya.

926
Views
5
Helpful
4
Replies