The 6k is 1u switch no supervisor slots , the 4k in nexus is a blade itself , do you mean catalyst 6000 and 4000 as they are chassis based or the nexus 7000 is chassis based as well with SUP slots and it also depends exactly on the platform a 6513 and 6509 would have different SUP slots and 7009 and 7018 would be different etc , so you must check what platform you have then confirm where to put them as per the data sheet
The MSFC card best to read this explains exactly what each card does
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...