07-20-2012 12:17 AM - edited 03-07-2019 07:53 AM
Hi all
with Cisco nexus switches, is it possible to run Fibre channel and ethernet along the same fibre?
cheers
Carl
07-20-2012 12:50 AM
is it possible to run Fibre channel and ethernet along the same fibre?
Yes.
It's called Fibre Channel over Ethernet (FCoE).
Some 5500 will support FCoE only or FCoE and FC.
07-20-2012 02:11 AM
Hi Carl
To add to leolaohoo comment - for FC support you need devices marked UP in the partnumber.
UP - unified port which can support either etherntt or FC depending from the config.
HTH,
Alex
07-20-2012 02:27 AM
hi there
my question is
could I send FC traffic and Ethernet traffic down the same fiber ?
07-20-2012 03:06 AM
could I send FC traffic and Ethernet traffic down the same fiber ?
If you are using the 5548UP (UP stands for Universal Port) then you can send FCoE, FC, Ethernet down a single pipe.
Take note that my response is regarding the Nexus 5K. I haven't responded with the different line cards of the 7K that will support FC, FCoE, Ethernet.
I also have NOT mentioned about the up-and-coming Nexus 6K.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide