Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco POE overload

Hi all,

We are looking to implement a VoIP telephone system.

I know the phones we are going to have use 5 watts each yet when I look at the switch port they are plugged into, it says it is giving out 15 watts. I think this has something to do with the class of device.

My question is, if I plug 48 VoIP phones into the switch, will it overload itself because it thinks the phones are using 15 watts each but they are really using 5 watts.

Jamie

1 REPLY
Hall of Fame Super Blue

Re: Cisco POE overload

UWIC2 wrote:

Hi all,

We are looking to implement a VoIP telephone system.

I know the phones we are going to have use 5 watts each yet when I look at the switch port they are plugged into, it says it is giving out 15 watts. I think this has something to do with the class of device.

My question is, if I plug 48 VoIP phones into the switch, will it overload itself because it thinks the phones are using 15 watts each but they are really using 5 watts.

Jamie

Jamie

You don't say which switch you are referring to. However if the switch does not have enough power then it won't actually overload itself, it's just that some ports will not get an power delivered to them. You can specify the power to each port on some switches such as the 3560 so if you know it only needs 5 watts you could specify this, see this link for details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_46_se/command/reference/cli1.html#wp10290687

Jon

853
Views
0
Helpful
1
Replies
CreatePlease login to create content