Please recommend a radius server, either freeware or not.
If it's for use with Cisco devices then Cisco do a TACACS/Radius server called ACS which you can get as software for Windows or you can have a dedicated hardware applicance. See this link for more details -
... and if freeware solution is called for then one of the most popular Radius servers (also used professionally) is the FreeRADIUS at http://www.freeradius.org (runs under Linux). Also there is an open source implementation of the TACACS+ server at http://www.shrubbery.net/tac_plus/ (also a Linux software). Both these products work well with Cisco devices.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...