Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Router 3745 - Crypto ISAKMP Policy command not working

Hi, I have Cisco 3745 Router and trying to execute the command Cryptop isakmp policy, but command not accepting and says invalid input detected.

Below is the show version, please suggest, if how do i achieve this.

Cisco IOS Software, 3700 Software (C3745-SPSERVICESK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Wed 18-Aug-10 08:18 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

VSOFT_Hydreabad uptime is 25 minutes

System returned to ROM by reload

System image file is "flash:c3745-spservicesk9-mz.124-25d.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 3745 (R7000) processor (revision 2.0) with 112640K/18432K bytes of memory.

Processor board ID JPE071410VY

R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache

2 FastEthernet interfaces

DRAM configuration is 64 bits wide with parity disabled.

151K bytes of NVRAM.

62592K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

Regards
MAC       

Regards MAC
3 REPLIES
New Member

Re: Cisco Router 3745 - Crypto ISAKMP Policy command not working

I believe you are missing advance security feature / advance ip services which include IPSec feature. Other plz correct me if I am wrong

Sent from Cisco Technical Support iPad App

Hall of Fame Super Silver

Re: Cisco Router 3745 - Crypto ISAKMP Policy command not working

I believe that this answer is exactly correct. So +5.

I checked the feature navigator from the Cisco site looking for this IOS image and find that it does not have support for crypto isakmp. Mac asks how to achieve the configuration. I would say that upgrading to the feature set that does support crypto isakmp would be the solution. I checked the software download page and it shows that software is still available for the 3745 so a feature set upgrade should be feasible.

HTH

Rick

VIP Purple

Cisco Router 3745 - Crypto ISAKMP Policy command not working

This is from IOS-Packaging

http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/products_qanda_item09186a00801af2c6.shtml

http://www.cisco.com/image/jpg/en/us/guest/products/ps5460/c1167/ccmigration_09186a00801af2c6_09186a0080843375-5.jpg

It's always good to remember how the old feature-sets relate to each other.

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
1732
Views
5
Helpful
3
Replies
CreatePlease login to create content