I just purchased a Cisco 881 Advanced IP Services router. I had an 861 that I am currently replacing. For some reason I can not access crypto isakmp commands? Any ideas on why this feature would be available as I on cisco's data sheet, Advanced IP services gets all the same features as the Advanced Security?
I would have thought that crypto isakmp would be included in Advanced IP Services. Perhaps the output of show version might provide some insight into the issue?
Do show version, and see which license is applied. This will clear the things. If its advanced ip services then do the following
licence accept end user policy
After that you will need a reboot
Here is the show ver:
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9_NPE-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 26-Feb-13 11:13 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
R1 uptime is 2 hours, 31 minutes
System returned to ROM by power-on
System restarted at 13:53:27 EST Sat Sep 28 2013
System image file is "flash:c880data-universalk9_npe-mz.152-4.M3.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
Cisco 881 (MPC8300) processor (revision 1.0) with 236544K/25600K bytes of memory.
Processor board ID xxxxxxxx
5 FastEthernet interfaces
256K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
Device# PID SN
*0 CISCO881-SEC-K9 xxxxx
License Information for 'c880-data'
License Level: advipservices_npe Type: Permanent
Next reboot license Level: advipservices_npe
Configuration register is 0x2102
For this you need to talk to the vendor from whom you purchased. You can upgrade from npe to full advance ip services
Default option for 880 Sec router is
SL-880-ADSEC (default) (its not NPE)
now to upgrade to Advance ip services you need this
SL-880-AIS (upgrade option)
Cisco 880 Advanced IP Services Image Feature License
This comes as spare so unless you specifed them clearly that you needed full advance ip services then this should be the license.