Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Router used as DHCP server

Guys. I am using 2500 Router and I am setting it up as a DHCP server.

well there are 2 questions from me, actually and if you guys can explain, please do:

1. is it not possible to enter dhcp network as a subnetted one? for example:

Router(config-dhcp)#network 192.168.9.0 /29 OR

Router(config-dhcp)#network 192.168.9.0 255.255.255.248

When I tried to config like that, my clients wont receive any IP but if I enter this config:

Router(config-dhcp)#network 192.168.9.0 255.255.255.0

my clients are able to pull of IP addresses... I wonder why.

2. Is it possible to do this:

-I reserved a certain MAC Address to one particular IP Address.

-If that IP Address is unoccupied (assuming all other IP is full already), another different MAC Address client still CAN'T get that IP address.

Please enlight.

Thanks

Regards.

4 REPLIES
Bronze

Re: Cisco Router used as DHCP server

Hi,

1. You need to configure ip clasless :)

2. Depends on software.

BR,

Bjornarsb

New Member

Re: Cisco Router used as DHCP server

@Bjor: Thanks for the kind reply, but I have set to enable IP Classless and it still wont receive any DHCP IP from the DHCP server (router)

and what software do you mean, Bjorn? do you mean the IOS? can you spesifically tell? Thank you...

and.. @Guru: Yes, thanks for the link, but I've covered that link this few days and I still can't do that...

Thanks

Regards

Re: Cisco Router used as DHCP server

HI,

Refer link below for Cisco Document on Configuring the Cisco Router as DHCP Server:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt1/1cfdhcp.htm

Pls Rate if HELPS

Best Regards,

Guru Prasad R

New Member

Re: Cisco Router used as DHCP server

Please anybody can help me through this DHCP server things with my router?

I still can't get it worked with subnetted network such as 192.168.9.0 /29

Thank you..

Regards

106
Views
0
Helpful
4
Replies