Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO RPS675 question

Hello all,

We have a network with several Cisco hardware.

One of them is an old RPS675.

We have connected 5 other hardware items to this device, and now one of 5 lights at the front pannel is blinking Amber.

The rest is blinking green.

My question is wich device is not working correctly and what can be the solution to this.

The led wich is blinking amber is connected to a Cisco catalist 2950 (48 port switch)

Allready thanks for anwsers

Daniel Spanjers

  • LAN Switching and Routing
Everyone's tags (1)
1 REPLY
Silver

Re: CISCO RPS675 question

Hi,

I would recommend you to check the Troubleshooting guide for Cisco RPS 675 device on the following link:

http://www.cisco.com/en/US/docs/switches/power_supplies/rps675/hardware/installation/guide/rpstrb.html

This document describes the different LED states you can see on the RPS.

Andras

466
Views
0
Helpful
1
Replies