Cisco SDM was not found on this router

[catalin.petrescu]

Hello,

After adding some pdlm's on my 3845 router , when i try to enter sdm i get this error : Cisco SDM was not found on this router and it ask me to enter a local location for sdm.

This is my show flash:

c3845-advipservicesk9-mz.124-3d.bin

sdmconfig-38xx.cfg

sdm.tar

es.tar

common.tar

home.shtml

home.tar

256MB.sdf

securedesktop-ios-3.1.1.27-k9.pkg

Thanks.

[carenas123]

You can use the following link as a guideline and check the SDM installation :

http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_installation_guide09186a00803e4727.html

[abhyankar]

What? SDM not found? Your router's IOS is updated? SDM requires 12.3 onwards IOS according to what i read in SDM doc. Installation is pretty easy. You might forgot to specify router's WAN interface IP or whatever if your router is a DHCP server then make correction and

proceed further to install SDM. Select option install SDM on router as well as on computer too

. I did installation of SDM 2 days ago on 1841 router. I had no problem. Read whole note before proceeding. And if your laptop or machine is Windows based, use SDM in Firefox,

IE really sucks. It blocks SDM pop up window.

Regard's,

Amey Abhyankar.