Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco switch 2960s

Hello,

I have a switch which is powers up but does not work. I saw the below logs the I connected to to an interface.

Kindly assist.

POST: Inline Power Controller Tests : Begin

POST: inline power post failed for port 0

POST: inline power post failed for port 1

POST: inline power post failed for port 2

POST: inline power post failed for port 3

POST: inline power post failed for port 4

POST: inline power post failed for port 5

POST: inline power post failed for port 6

POST: inline power post failed for port 7

POST: inline power post failed for port 8

POST: inline power post failed for port 9

POST: inline power post failed for port 10

POST: inline power post failed for port 11

POST: inline power post failed for port 12

POST: inline power post failed for port 13

POST: inline power post failed for port 14

POST: inline power post failed for port 15

POST: inline power post failed for port 16

POST: inline power post failed for port 17

POST: inline power post failed for port 18

POST: inline power post failed for port 19

POST: inline power post failed for port 20

POST: inline power post failed for port 21

POST: inline power post failed for port 22

POST: inline power post failed for port 23

POST: Inline Power Controller Tests : End, Status Failed

POST: Thermal, Fan Tests : Begin

POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin

POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin

POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin

POST: EMAC Loopback Tests : End, Status Passed

Election Complete

Switch 1 booting as Master

Waiting for Port download...Complete

*Mar  1 00:00:1e Vlan1, changed state to down

*Mar  1 00:01:37.077: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan

*Mar  1 00:02:14.506: %SYS-5-CONFIG_I: Configured from memory by console

*Mar  1 00:02:14.736: %STACKMGR-5-SWITCH_READY: Switch 1 is READY

*Mar  1 00:02:14.736: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN

*Mar  1 00:02:14.736: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/1 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/2 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/3 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/4 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/5 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/6 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/7 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/8 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/9 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/10 can't be broug

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/11 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/12 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/13 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/14 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/15 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/16 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/17 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/18 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/19 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/20 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/21 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/22 can't be broug

*Mar  1 00:02:15.025: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/23 can't be broug

*Mar  1 00:02:15.025: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/24 can't be broug

*Mar  1 00:02:15.040: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY

Anim

2 REPLIES
VIP Purple

Re: Cisco switch 2960s

Hi Frederick,

POST: Inline Power Controller Tests : Begin

POST: inline power post failed for port 0

POST: inline power post failed for port 1

POST: inline power post failed for port 2

POST: inline power post failed for port 3

POST: inline power post failed for port 4

POST: inline power post failed for port 5

POST: inline power post failed for port 6

POST: inline power post failed for port 7

POST: inline power post failed for port 8

POST: inline power post failed for port 9

POST: inline power post failed for port 10

POST: inline power post failed for port 11

POST: inline power post failed for port 12

POST: inline power post failed for port 13

POST: inline power post failed for port 14

POST: inline power post failed for port 15

POST: inline power post failed for port 16

POST: inline power post failed for port 17

POST: inline power post failed for port 18

POST: inline power post failed for port 19

POST: inline power post failed for port 20

POST: inline power post failed for port 21

POST: inline power post failed for port 22

POST: inline power post failed for port 23

POST: Inline Power Controller Tests : End, Status Failed

POST: Thermal, Fan Tests : Begin

POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin

POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin

POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin

POST: EMAC Loopback Tests : End, Status Passed

Election Complete

Switch 1 booting as Master

Waiting for Port download...Complete

*Mar  1 00:00:1e Vlan1, changed state to down

*Mar  1 00:01:37.077: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan

*Mar  1 00:02:14.506: %SYS-5-CONFIG_I: Configured from memory by console

*Mar  1 00:02:14.736: %STACKMGR-5-SWITCH_READY: Switch 1 is READY

*Mar  1 00:02:14.736: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN

*Mar  1 00:02:14.736: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/1 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/2 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/3 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/4 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/5 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/6 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/7 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/8 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/9 can't be brought up because it failed POST in Inline Power test.

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/10 can't be broug

*Mar  1 00:02:15.014: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/11 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/12 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/13 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/14 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/15 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/16 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/17 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/18 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/19 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/20 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/21 can't be broug

*Mar  1 00:02:15.019: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/22 can't be broug

*Mar  1 00:02:15.025: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/23 can't be broug

*Mar  1 00:02:15.025: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi1/0/24 can't be broug

*Mar  1 00:02:15.040: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY

try no shut on each interface and check it.

If still fails then, Please contact Cisco and try to get the appliance replaced. This swicth is dead, also raise a TAC case.

Reagrds

Dont forget to rate helpful posts.

Hall of Fame Super Gold

Re: Cisco switch 2960s

Contact Cisco TAC.  The ASIC is dead. 

6969
Views
5
Helpful
2
Replies
CreatePlease to create content