Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco switch 3750, policy inbound traffic per IP

Good afternoon,

We are using Cisco 3750 switches in our environment as distribution switches.

We currently use to police inbound traffic, but we need to find a solution to limit inbound traffic per IP.

Something like this “Inbound traffic for each IP can be maximum 1 Mbps”

This can be done having, one ACL and one class-map for each IP, but in my situation is not a practical solution, because we have more than 500 IP’s on that site.

Is any way to accomplish this without writing 500 ACLs and 500 class-map?

Thank you,

VIP Super Bronze

Cisco switch 3750, policy inbound traffic per IP


Instead of ACL, you can use rate limiting.

Have a look at this document for rate limiting on the 3750 series switches.


New Member

Re: Cisco switch 3750, policy inbound traffic per IP

Thank you for reply.

I need to police ingress traffic per IP.

On the 3750 switch, port Gi1/0/1 is connected the MPLS edge router.

I wand each individual user on the LAN to be policed to 1 Mbps (ingress) when communicate with MPLS network.

Did you see by any chance this kind of configuration?

Thank you


CreatePlease login to create content