Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Switch auto blocks ICMP

Hello,

i have 2 switche connected to gether. There is the scheme:

                                                                                                                                            ------------ Monitoring system

                                   Internet ------------- Router ---------- Cisco 2960 SW ---------- Cisco ME 3400 ------------ Devices

                                                                                                                                            ------------ Another Switches

                                                                                                                                            ------------ Users

The monitoring system is Nagios. I have in my network another 120 devices. Is some evides are down the nagios sends me SMS. The problem is is devices goues UP I can t ping these devices form nagios port more tha 2 hours. From another port it is OK.

My question is:   Are any limitations in cisco switches thaht prevent network from a lot of ping requests by default? I yes, in witch switch 2960 or ME 3400? And how can i disable this function?

There is default configurations in switches. I uses only broadcast storm filter to limit broadcast to 100 pps.

Thax

David

Everyone's tags (3)
1 REPLY

Re: Cisco Switch auto blocks ICMP

2 hours sounds like an ARP cache issue to me.  When the device goes back on line, and the Nagios cannot see it, what is in the ARP cache of the Nagios?  Is it the same as the ARP cache in any other device that can ping it?

Kevin Dorrell

Luxembourg

1790
Views
0
Helpful
1
Replies
CreatePlease to create content