The approach suggested by Dragan of copying directly from switch to switch should work. The other option would be to use tftp to copy the switch IOS from the switch to your PC and then on the switches that do not have images copy using tftp from your PC to the switch.
If the switch has no image is it running in rommon? If so the tftpdnld command may give you the ability to copy the IOS image.
Perhaps we should also verify that the image on the one switch is appropriate to use on the other switches. Are the other switches the same model, do they have the same amount of flash and of memory?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...