cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6219
Views
6
Helpful
4
Replies

CISCO SWITCH PART NUMBERS

mshirley551
Level 1
Level 1

Could anyone please help...

On a Cisco switch part number like below you get a different letter at the end.  eg. -E, -S, -L etc

Does anyone know what the different letters mean?      

WS-C2960-24PC-S

4 Replies 4

These letters tell you which Feature set is running on the switch. If you have a WS-C2960-24PC-S it's running the LAN Lite software, and the WS-C2960-24-PC-L is running the LAN Base software with more features.

You can find this info in the Data-Sheets of the particular product:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd806b0bd8.html

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Cheers, thanks for info

Seb Rupik
VIP Alumni
VIP Alumni

According to:

http://www.cisco.com/en/US/products/ps6406/prod_models_comparison.html

...'S' and 'L' denote feature set. Not sure about 'E' though?

johnlloyd_13
Level 9
Level 9

hi mark,

to my knowledge, the last letter depicts the IOS used by switch platform.

for your case, i believe you're running a standard image (hence for the 'S').

an 'E' is for enhanced image.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: