Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco to Dell

I have a cisco 4500-x that will talk to our Netapp stroage and a Dell powerconnect 5424 that talks to our Equallogics.  I need the two to talk to each other I have a 10g sfp in the port on the 455-x and a 1g sfp on the port on the dell.  I have the ports configed for the same vlan and both set to trunk yet no connection.

Help and many thanks.

Everyone's tags (1)
2 REPLIES

Re:Cisco to Dell

The 10G SFP cannot drop down to 1G speeds. You will need to use a 1G SFP for the uplink to the PowerConnect switch.

Regards,
Mike


Sent from Cisco Technical Support Android App

New Member

Re:Cisco to Dell

Thank you I put in a 1g sfp non supported though.  I got a link on both sides but could not ping from cisco or the dell to the other.

145
Views
0
Helpful
2
Replies