08-20-2009 01:53 PM - edited 03-06-2019 07:21 AM
Hi guys, I would like to known if the Cisco TwinGig Converter Module-CVR-X2-SFP it can be used in a Catalyst 6500 supervisor VS-S720-10G-3C installed in the 10GBASE-X Ethernet ports,
If no (I think) is there a similar hardware option for the Catalyst 6509-E.
Thanks a lot
David
08-20-2009 02:35 PM
Hi David,
The TwinGig module (CVR-X2-SFP) will not work inside the VS-S720-10G-3C. And there isn't any option for the C6500 platform at this point.
HTH,
jerry
08-20-2009 02:54 PM
Unfortunately the Sup720 will only take XENPAK.
I hope I'm wrong with this.
08-20-2009 03:00 PM
Hi Leo,
VS-S720-10G-3C is what David mentioned and it will take X2 10G optic, just not the TwinGig.
Regards,
jerry
08-20-2009 06:59 PM
Hi Jerry,
Thanks for the correction. :)
+5
08-20-2009 07:01 PM
No problem Leo. =)
Regards,
jerry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: