Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Cisco TwinGig Converter Module-CVR-X2-SFP

Hi guys, I would like to known if the Cisco TwinGig Converter Module-CVR-X2-SFP it can be used in a Catalyst 6500 supervisor VS-S720-10G-3C installed in the 10GBASE-X Ethernet ports,

If no (I think) is there a similar hardware option for the Catalyst 6509-E.

Thanks a lot

David

5 REPLIES
Cisco Employee

Re: Cisco TwinGig Converter Module-CVR-X2-SFP

Hi David,

The TwinGig module (CVR-X2-SFP) will not work inside the VS-S720-10G-3C. And there isn't any option for the C6500 platform at this point.

HTH,

jerry

Hall of Fame Super Gold

Re: Cisco TwinGig Converter Module-CVR-X2-SFP

Unfortunately the Sup720 will only take XENPAK.

I hope I'm wrong with this.

Cisco Employee

Re: Cisco TwinGig Converter Module-CVR-X2-SFP

Hi Leo,

VS-S720-10G-3C is what David mentioned and it will take X2 10G optic, just not the TwinGig.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/product_data_sheet0900aecd806ed759_ps2797_Products_Data_Sheet.html

Regards,

jerry

Hall of Fame Super Gold

Re: Cisco TwinGig Converter Module-CVR-X2-SFP

Hi Jerry,

Thanks for the correction. :)

+5

Cisco Employee

Re: Cisco TwinGig Converter Module-CVR-X2-SFP

No problem Leo. =)

Regards,

jerry

1919
Views
5
Helpful
5
Replies