Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Cisco WS-C2960G-24TC-L problem

Hello,

I have a problem with Cisco WS-C2960G-24TC-L switch that after the power returns the switch has nothing appear at the console but the SYST LED is green (stable).

what do the indication mean?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Cisco WS-C2960G-24TC-L problem

Hi,

If you tried all of those I suggested and still have the same issue, than the switch probably has a hardware issue.  If you have SmarNet contract with Cisco, open a ticket with TAC and RMA the switch.

HTH

4 REPLIES
VIP Super Bronze

Cisco WS-C2960G-24TC-L problem

Hi,

Have you tried different setting on your console connection?  If not, try different baud rates (9600, 38400, etc...) and test.

If this does not help, try a different terminal emulation software like Putty, Tera Term, SecureCRT, etc...

If none of these help, try password recovery using link below:

http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

HTH

Bronze

Re: Cisco WS-C2960G-24TC-L problem

Hi,

Thank you.

I tested another device with the same PC, SecureCRT, console cable, and same console settings and it is OK.

and after that i used the same with the damaged device and nothing appeared at the console.

I tried the password recovery method but nothing changed. i.e; nothing appeared at the console.

and also i tried the same method with another device and the password recovery method is OK sine i i see the switch: appeared at the console.

what does it mean?

Thanks

VIP Super Bronze

Cisco WS-C2960G-24TC-L problem

Hi,

If you tried all of those I suggested and still have the same issue, than the switch probably has a hardware issue.  If you have SmarNet contract with Cisco, open a ticket with TAC and RMA the switch.

HTH

Bronze

Re: Cisco WS-C2960G-24TC-L problem

Thank you

251
Views
0
Helpful
4
Replies
CreatePlease login to create content