Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco WS-C6509

Hi,

My switch is having some problem.I am seeing all these.

Switch#show mod

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0702BJLK

2 0 Supervisor-Other Unknown Unknown

Can i reset the second sup remotely using this command.

hw-module module 2 reset or

ask someone to pull the card physically(Hot swappable)

Does it have any impact on the switch.

2 REPLIES
Hall of Fame Super Silver

Re: cisco WS-C6509

Hello Arun,

you can try to reload the module with

hw-module module 2 reset

if this is not enough have someone to reseat the card but verify it is hot-swappable I always powered off the switch when dealing with supervisors

It looks like to be hot-swappable

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Note/78_15767.html#wp51279

Hope to help

Giuseppe

Re: cisco WS-C6509

All modules in a 6500 chassis are hot-swappable, including the supervisors. This is called online insertion and removal. There is a very small but real risk that there could be a switching bus stall when any module is inserted or removed and the system is in centralized forwarding mode.

314
Views
0
Helpful
2
Replies
CreatePlease to create content