Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco1921 IOS Firewall

Hi all

I intend to build a IOS firewall with DMZ on a Cisco 1921 router with security license. To get a third interface I will install a EHWIC-1GE-SFP-CU modul.

Does anyone know if this coniguration works? Can I use this third interface as firewall port?

What about PPPoE? Is this protocol supported on this router?

regards

Pascal

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco1921 IOS Firewall

You don't need an additional phisical interface to have a DMZ. Configure subinterface with tagging on the internal LAN interface, and add a VLAN on the LAN switch.

Anyway, the answer to your questions is in the product data sheet.

http://www.cisco.com/en/US/prod/collateral/routers/ps10536/data_sheet_c78-660124.html

1 REPLY
Hall of Fame Super Gold

Re: Cisco1921 IOS Firewall

You don't need an additional phisical interface to have a DMZ. Configure subinterface with tagging on the internal LAN interface, and add a VLAN on the LAN switch.

Anyway, the answer to your questions is in the product data sheet.

http://www.cisco.com/en/US/prod/collateral/routers/ps10536/data_sheet_c78-660124.html

143
Views
0
Helpful
1
Replies