Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco2509 Terminal Server

please need your help.

when trying to connect to a router from the terminal server i got the following

LAB_TermSrvr#c1

Trying c1 (10.1.0.1, 2001)...

% Connection refused by remote host

i believe that the 2509 been configured correctly.

thank you.

5 REPLIES
New Member

Re: Cisco2509 Terminal Server

please see attached txt.

Re: Cisco2509 Terminal Server

your configuration is fine. Are you sure there is a port 2001?

On the host using port 2001, do a show run and check the "line con0" command, make sure there are no access-lists applied.

New Member

Re: Cisco2509 Terminal Server

here is my lines config:

line con 0

logging synchronous

transport output telnet

line aux 0

transport output telnet

line vty 0 4

privilege level 15

password 7 (cisco)

logging synchronous

transport input telnet ssh

line vty 5 15

transport input telnet ssh

!

scheduler allocate 20000 1000

there is no ACL

New Member

Re: Cisco2509 Terminal Server

Can you paste output of SHOW LINE? Never mind. Got it in the attachment.

Re: Cisco2509 Terminal Server

144
Views
0
Helpful
5
Replies