Cisco2509 Terminal Server

[mhasabal]

please need your help.

when trying to connect to a router from the terminal server i got the following

LAB_TermSrvr#c1

Trying c1 (10.1.0.1, 2001)...

% Connection refused by remote host

i believe that the 2509 been configured correctly.

thank you.

[mhasabal]

please see attached txt.

[Lucien Avramov]

your configuration is fine. Are you sure there is a port 2001?

On the host using port 2001, do a show run and check the "line con0" command, make sure there are no access-lists applied.

[mhasabal]

here is my lines config:

line con 0

logging synchronous

transport output telnet

line aux 0

transport output telnet

line vty 0 4

privilege level 15

password 7 (cisco)

logging synchronous

transport input telnet ssh

line vty 5 15

transport input telnet ssh

!

scheduler allocate 20000 1000

there is no ACL

[ToddWarren]

Can you paste output of SHOW LINE? Never mind. Got it in the attachment.

[Lucien Avramov]

You need "transport input all" as per configuration guide:

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml