Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco2951 and Cisco2921 in HSRP?

Hi,

Is it possible to configure a Cisco2951 and a Cisco2921 in HSRP?

Thanks in advance!

Everyone's tags (1)
2 REPLIES
Green

Cisco2951 and Cisco2921 in HSRP?

Juan,

Yes this possible.

As long as the LAN interfaces are in the same subnet or  & VLAN

Look at this link for HSRP configuration

http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp.pdf

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Hey Alex,I  know this is an

Hey Alex,

I  know this is an old post but I ran into it and...

 

This is possible only if there's  a L2 device connected in between the  two devices.

HSRP needs some form of L2 connectivity between  the devices failing which it will not work and it is not possible to interconnect two Cisco 2921's  or 2951's for that matter with the device ports. You will have to buy a intermediate L2 Switch..

Cheers,

Vignesh

 

2083
Views
0
Helpful
2
Replies
CreatePlease to create content