Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco5509 switch

Hi,

I have Cisco5509 with WS-X5530 Sup ,I am not able to access the console port of the SUP engine.

Telnetting to the switch IP ask me to enter the password,When I enter the password it says connection to host is closed.Is it due to wrong password?

How to access the console port of the WS-C5509 which has the WS-X5530 SUP engine?

How to recover the password?

Simply using SET command can I change the password to new password?

Please help me to resolve the issue.

Thanks and Regards,

S.Venkataraman.

2 REPLIES

Re: Cisco5509 switch

if Im not mistaken you could use a straight-through CAT5 cable for console.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml#connectcat5000

for password recovery you need to console to the switch, follow this instructions,

password recovery http://www.cisco.com/en/US/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml

HTH

Jorge

Silver

Re: Cisco5509 switch

Try this URL.. Find your device and follow the instructions... Good Luck.. Please rate..

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00801746e6.shtml

161
Views
0
Helpful
2
Replies