Cisco861 do not use IGMP Snooping

[CSCO10993123]

hi all,

I useing Cisco861  : C861-universalk9-mz.124-24.T3.bin

on my Cisco861 the command "ip pim dense-mode","ip igmp static-group "command does not exist,

router(config)# ip p?

port-map    prefix-list

router(config)#

router(config)# int vlan 1

router(config-if)# ip p?

policy   proxy-arp

router(config-if)#ip i?

idle-group   infomation-reply   inspect

router(config-if)#

but on the Cisco systems WEB-site

http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/vlanconf.html#wp1053218

Cisco861 use igmp command?

What am I missing??

[cadet alain]

Hi,

did you configure ip multicast-routing ? Furthermore ip pim dense-mode is an interface command.

if you don't have ip igmp static command you can use ip igmp join command which serves the same purpose.

Regards.

Alain

[CSCO10993123]

Hi, Alain

I want to configure multicast routing.

but my router is...

router(config)#int vlan 1
router(config-if)#ip p?
policy  proxy-arp

router(config)#int fastEthernet 1

router(config-if)#ip P?

% Unrecognized command

do not use  "ip pim dense-mode"command an interface command.

and,
router#
router#sh ip ig?
% Unrecognized command
router#sh ip i?
icmp  inspect  interface

#

Did you mean......this kind of network configuration

cisco 861 is can not in multicast configuration?.

"MulticastServer"----"Cisco861"-------"Catalyst2940-8TT"-------"Multicast Receiver"

                               (querier)          (IGMP snooping)

Regards.

masayuki.

[cadet alain · Accepted solution]

Hi,

i just a took a look at Cisco feature navigator and the 861 doesn't even appear in the platforms supporting PIM v2 nor IGMPv2.

Regards.

Alain

[CSCO10993123]

HI,

Cisco 860, Cisco 880, and Cisco 890 Series Integrated Services Routers Software Configuration Guide

It is likely to mistake the cisco web site.

http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/vlanconf.html#wp1053218

Try looking for a different platform can be used in IGMP.

Thanks.

Regards.

masayuki