05-30-2008 12:14 PM - edited 03-05-2019 11:20 PM
I did a "show config" and noticed
#frame distribution method
set port channel all distribution mac both
set spantree portfast 5/21-22 disable
set spantree bpdu-filter 5/21-22 disable
#port channel
set port channel 5/21-24 779
how do I clear these configurations under CatOS
Solved! Go to Solution.
05-30-2008 12:21 PM
One of my pet-peeves with CatOS. Once you enable a feature and you disable it, the command remains there as 'disable'.
As for the port channel, the ports are actually bundle like in IOS, they are just sharing the same port ID. They are only bundle if you use set port channel command
HTH,
__
Edison.
05-30-2008 12:21 PM
One of my pet-peeves with CatOS. Once you enable a feature and you disable it, the command remains there as 'disable'.
As for the port channel, the ports are actually bundle like in IOS, they are just sharing the same port ID. They are only bundle if you use set port channel command
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: