Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

clear channel settings in CatOS

I did a "show config" and noticed

#frame distribution method

set port channel all distribution mac both

set spantree portfast 5/21-22 disable

set spantree bpdu-filter 5/21-22 disable

#port channel

set port channel 5/21-24 779

how do I clear these configurations under CatOS

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: clear channel settings in CatOS

One of my pet-peeves with CatOS. Once you enable a feature and you disable it, the command remains there as 'disable'.

As for the port channel, the ports are actually bundle like in IOS, they are just sharing the same port ID. They are only bundle if you use set port channel command

HTH,

__

Edison.

1 REPLY
Hall of Fame Super Bronze

Re: clear channel settings in CatOS

One of my pet-peeves with CatOS. Once you enable a feature and you disable it, the command remains there as 'disable'.

As for the port channel, the ports are actually bundle like in IOS, they are just sharing the same port ID. They are only bundle if you use set port channel command

HTH,

__

Edison.

483
Views
0
Helpful
1
Replies
CreatePlease to create content