Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Clearing an Dynamic Cluster -HSRP and Dynamic Cluster -NAT ACL configuration

I am trying to upgrade a 2950-24 Catalyst Switch that wa previously configured with both Dynamic HSRP and NAT  ACL as shown in the following extract below.

I would like to remove this configuration but it is proving so difficult, this is because, I dont understand how the configuration got here in the first place, please  help


SW1#show access-list
Extended IP access list CMP-NAT-ACL
    Dynamic Cluster-HSRP deny   ip any any
    Dynamic Cluster-NAT permit ip any any


interface Vlan1
 ip address
 no ip route-cache
ip http server
ip access-list extended CMP-NAT-ACL
 dynamic Cluster-HSRP deny   ip any any
 dynamic Cluster-NAT permit ip any any
line con 0
 exec-timeout 0 0
line vty 0 4